| |
Solinst Equipment
Page
Contents
Level
Measurement Devices
WaterLevel Meters
|
Click
Here To Order
|
 Model
Mini101 Click
here for detailed information
Mini101 is a flat
tape water level meter ideal for use in narrow diameter
applications (as small as 0.3") where high accuracy
is desired. Lengths up to 65 feet. |
|
Click Here To Order
|
Solinst Model 101 is an accurate
and reliable water level meter for measuring the depth of
water in wells, boreholes and standpipes. "Dog bone
design" tape avoids adherence to casing and comes in
lengths up to 3,000 feet. |
|
Click
Here To Order
|
Model 102 is a coaxial
cable water level meter designed to measure groundwater
levels especially in small diameter tubes and piezometers.
Markings are at 5 ft. , 0.5 or 1 m intervals. |
Interface Meter
|
Click
Here To Order
|
Model 122 measures product level and thickness
accurately to 1/100'. Measures both floating and sinking
hydrocarbon, non-aqueous layers. Markings are either 1/100' or
1mm. |
Tag Line
|
Click
Here To Order
|
Solinst Model 103 Measures the depth to
the bottom of a well or to the top of a backfill sand or
bentonite layer during completion of a well.
Markings are at 5 ft. , 0.5
or 1 m intervals. Weight 1.5 lbs or 680 grams. |
Well Casing Depth Indicator
|
Click
Here To Order
|
Simple, reliable and easy to operate, the
Well Casing Depth Indicator uses a magnetic pendulum assembly,
making it ideal for measuring the depth at which a steel well
casing ends. This is useful when hydrofracturing, for measuring
the total depth of a well or for confirming well construction. |
Reeloggers
Reeloggers
|
Click
Here To Order |
The Reelogger is a water level and/or
multiparameter datalogging system that introduces many new
concepts ideal for field use by hydrogeologists, hydrologists
and anyone wishing to monitor water automatically. |
Data
Loggers
Data Loggers
|
Click
Here To Order
|
This data logger comes in two models LT
and the LTC. The LT model has a pressure transducer,
temperature sensor, 10-Year battery and datalogger all housed in
a very small, minimal maintenance, 7/8" x
4.9" stainless steel housing. The LTC model has all
of these features and an added conductivity sensor in a slightly
longer 7/8 dia. probe. Solinst also has the Barologger, which is
ideal for accurate barometric compensation readings. Also
available is the Leveloader, a simple data transfer unit which
allows for easy downloading of data in the field. |
Sampling
Devices
Sampling Devices
|
Click
Here To Order
|
The Model 410
Peristaltic Pump is designed for vacuum pumping or pressure
delivery of liquids or gases. It is ideal for sample removal
from shallow wells and surface water. |
|
Click
Here To Order
|
The Solinst Flow-Through Cell System
allows the analysis of purge water, in-line as it flows, so that
sampling can begin as soon as the water stabilizes. This is an
essential part of low flow sampling which offers higher quality
samples while reducing purge volumes and thus sampling and
disposal costs. |
|
Click
Here To Order
|
Discrete interval sampling can be used to
profile an open borehole or screened well, to collect samples
from distinct levels or points of inflow, to obtain
representative water samples from below floating product layers
(LNAPL), and to obtain samples of sinking product layers (DNAPL). |
|
Click
Here To Order
|
Point source sampling can be used to
profile an open borehole or screened well, to collect samples
from distinct levels or points of inflow. There is negligible
disturbance as can be caused by pumping and purging. Mixing of
the sample with water from different levels in the well is
minimized.
|
|
Click
Here To Order |
The WaTerra Pump is a simple, reliable
inertial pump which uses and age-old, proved technology, in an
elegant manner uniquely adapted to the needs of modern
groundwater monitoring.
|
|
Click
Here To Order |
These in-line disposable filters are
designed specifically for the preparation of groundwater samples
for dissolved metals analysis and for filtering large volumes of
turbid groundwater.
|
Drive-Point Equipment
Drive-Point Equipment
|
Click
Here To Order |
The Model 601 Standpipe
Piezometer is the least expensive of the drive-point line, and
is designed to be placed within an open borehole.
The pointed PVC tip is suitable for pushing into very loose
sands at the base of a borehole, or for backfilling in place
within test pits. |
|
Click
Here To Order |
The Model 615 Drive-Point Piezometer is
designed to give field personel a truly inexpensive method to
monitor groundwater in suitable conditions. Solinst
Drive-Point Piezometers are most often installed permanently as
wells, for short-term or long-term monitoring of groundwater
level and quality. |
|
Click
Here To Order |
The Model 660
Drive-Point Profiler is designed to allow collection of samples
from multiple points in a single drive/drilling location, at
discrete zones. It allows
contaminant vs. depth profiling, and detailed plume delineation. |
Clearview Bailers
|
This Month's News
|
